| | |
|
| |
| | |
|
|
|
3X4 Multiswitch by Eagle Aspen (DTV3x4)
|
3x4 Eagle Aspen
|
Detailed Description
This 3x4 Multiswitch by Eagle Aspen DTV3x4 allows you to combine signal from one satellite, using a dual LNBF and distribute the signal to up to 4 satellite receivers. Use the third input for UHF,VHF or CATV feed and run only 1 line inside and split it inside using diplexers!
FAQ of Eagle Aspen 3x4 Multiswitch DTV3x4
-
Q2: There are two cables from the dual LNBF, how can I know which one is 13V or 18V.
A: There is no difference for both cables from the dual LNBF. Therefore, either of these 2 cables can go into either 13V or 18V input of the switch.
-
Q4: Do I need to use the terminator for those unused output ports?
A: Yes. It is suggested to connect the terminators to the unused output ports when the off-air signal is also connected.
(CAUTION: The 75 ohm terminator can ONLY use for SAM-3402 but NOT to use with SAM-4803, SAM-4402-3A, SAM-6802, WB-68 & WB616).
-
Q5: If I need more than 4 outputs, how can I do?
A: You can use Zinwell 4x8 Multiswitch SAM-4803, Zinwell 6x8 Multiswitch WB-68, or 6x16 Multiswitch WB616.
|
|
|
|
|
First Strike FS-1
 |
Trimax SM-2200
 |
|
|