First find a suitable place to install the dish. It should be line of sight (use a compass to find
azimuth angels (sideways). Make sure there are no overhead obstructions like trees, buildings etc.

Next, assemble the dish according to the dish manufactures instructions.
Fit the LNB.

Preset the dish elevation (up/down) angle first. There may be a scale on the back. An
inclinometer may be of use if you know the dish elevation offset angle. Set the feed rotation
polarization angle too. There may be polarization rotation scale on the LNB feed horn throat. Or
in some markets the dish has screws and scale on the back to set this.

Facing the satellite, clockwise polarization is positive, negative is anticlockwise. Look up the
elevation and polarization in a chart (supplied with the dish) for the required satellite and
location.

Next use a compass to roughly set the azimuth. Hook up the SAM-lite2 meter to the LNB. Switch on the meter, gently move the dish to change from searching to found. Peak the dish for maximum Q. If reception is dual polarity peak the optimum Q for both polarities.

In certain markets grounding is a legal requirement of the dish.

  Be careful with satellite dish pointing not to injure others by dropping tools or
hurting yourself by falling down.

The meter is powered by a replaceable NiMH battery pack.As with all batteries the pack will deteriorate in time. To maximize the life of the battery pack, be sure to use/discharge and recharge the meter
Frequently

• Remove the screw located at the upper back side of the instrument.
  
  
• Take away the battery lid and disconnect the current battery pack.
  
  
• Attach the socket of the new battery to the connector on the instrument.
  
  
• Put the battery pack in place and put back the lid and screw.
  
  
• Do not use any other kind of non original batteries. A different pack can damage the meter and invalidate the warranty.

Too make the meter as cost effective and future proof, various options can be purchased to enhance the meter. As all do not require these features they have a modest cost. In addition when new technologies are developed we can also develop the meter to add these type of functions, making it feature proof
Visit www.maxpeak.tv/shop.php for latest list of additional features and cost.
Select the feature you want to add - purchase and follow the instructions.

Please note that the additional feature you purchase can only be used to a specific
instrument. If you have more meters, the feature has to be purchased for each meter if
required.
Some additional feature available:

• More settings, instead of 16 you will have 60, also different firmware to faster select the required settings.
• DISEqC menu. Full DISEqC switch menu
• Scientific measurements, as well as the standard RF and Q levels there will be MER, pre BER/PER and post BER/PER

The Max Tracker has the ability to be customized to your needs. You can add satellites to your Max Tracker Satellite Meter from the master list or you can create your own.

Adding Satellites to you Max Tracker:

• Go the Maxpeak website, www.maxpeak.tv
• Login and click on “My Profile”
  
• Select your Max Tracker serial number and click on “Settings Download”
  
• You will be able to see all available satellites on the “Available Parameters” list.
• Simply select and add the desired satellite to the “Selected Parameters” list.
  
  
  
  
  
• You will then need to click on “Download and now”  follow the instruction provided by the site.

This product carries a one year warranty from date of purchase.
Orbital Tracker reserve the right to replace or repair a faulty meter. The warranty does not cover misuse or damage caused by dropping the meter or if the meter has been opened.