| | |
|
| |
| | |
|
|
|
On Sale!! HD Mini Tracker Satellite Meter OTM 210 Signal Finder
|
OTM 210
|
Detailed Description
This is the new HD Mini Tracker by Orbital Tracker. This digital satellite meter is micro-processor controlled, making it very reliable and accurate. The signal strength is presented graphically on the LCD-display in form of thermometer-scales and numerical (0-99). It can also present pitch tones (the higher tone the better signal) and a buzzer. The HD Mini Tracker is very sensitive and can detect the weakens of satellite signals. The unit can easily be attenuated for fine tuning.
Check out the YouTube video on the HD Mini Tracker click on video link below.
Video Link
- Built-in light for night dish adjustment.
- Audible tune-in signal.
- Build in Compass
- Listening to signal tone while changing antenna direction makes it easy and quick to find the best signal reception.
- 950 MHz to 2150 MHz.
- 22 KHz light tells when receiver is using 22 KHz signal.
- Receiver connection required to power meter.
- Works with DSS DirecTV, DishNetwork, ExpressVu,Shaw Direct,FTA Satellites like Galaxy 19,Hispasat 30W and Amazonas just to name a few.
|
- LNB Connecting Port
- Receiver Connecting Port
- Compass
- Buzzer Control Key
- LED and Back-light display
- ATT Increasing Key *
- ATT Reducing Key
- LCD Graphic Display
- Adjustable signal knob
* If the incoming signal is too strong, (the thermometer-scales shows max and the signal strength value shows 99) it can easily be attenuated by enabling this "attenuation: function, it reduces the incoming signal to a lower level. There are four steps attenuation in total.
|
Operation:
- Switch the satellite receiver on, the HD Mini Tracker will turn on by itself.
- Set your dish to the proper azimuth and elevation setting. (This information should be obtained from your satellite receiver or www.dishpointer.com)
- Adjust the knob until the signal strength display at 0% (the critical point).
- Peak the signal by slowly moving the azimuth and elevation of your dish. The higher values, the better signal strength. If the HD Mini Tracker’s reading becomes full scale, you can adjust the “<ATT” to reduce the incoming signal to a lower level. Continue to move the dish until you have the highest possible meter reading and the highest possible buzzer pitch.
-
Remove the jumper cable and digital HD Mini Tracker meter and reconnect the Satellite LNB/LNBF to your receiver.
|
|
Specifications:
| Model
|
HD Mini Tracker Satellite Meter
|
| Input Freq.
|
950-2150MHz
|
| Input level min.
|
-40dBm
|
| Input level Max.
|
-10dBm
|
| Input impedance
|
75 Ohm
|
| Output impedance
|
75 Ohm
|
| Power supply
|
DC 13-18v
|
| Operating range
|
52 - 60dB
|
|
|
|
|