| | |
|
| |
| | |
|
|
|
DiSEqC 1.0 Switch 4 x 1 Dish Network by Pansat
|
DS4X1
|
Detailed Description
|
This Pansat DISEqC product is 4-way Wideband DISEqC Switch that allows for simultaneous connections for up to 4 satellites to be hooked up and linked into one receiver. This Pansat DISEqC LNB switch is compatible with most FTA, or free to air receivers such as the common SonicView, Coolsat, and various other receivers.
|
|
Specifications:
|
DiSEqC (Digital Satellite Equipment Control), pronounced "Die-Sec", is a special communication protocol for use between a satellite receiver and a device such as a multi-dish switch or a small (** see note at footer) dish antenna rotor. DiSEqC was developed by European satellite provider Eutelsat which now acts as the standards agency for the protocol.
DiSEqC relies only upon a coaxial cable to transmit both bidirectional data/signal and power. DiSEqC is commonly used to control switches and motors, and is more flexible than 13/18 volt and 22 kHz tone or ToneBurst/MiniDiSEqC techniques. DiSEqC is also compatible with the actuators used to rotate large C-Band dishes if used with a DiSEqC positioned. Despite its name, it has been used on fully analogue or only partially digital-capable) satellite receivers.
A number of variations of DiSEqC exist:
|
|
DiSEqC
1.0
|
DiSEqC
1.1
|
DiSEqC
1.2
|
DiSEqC 2.0
|
DiSEqC 2.1
|
DiSEqC
2.2
|
|
1.0 receiver
|
Yes
|
No
|
No
|
Yes
|
No
|
No
|
|
1.1 receiver
|
Yes
|
Yes
|
No
|
Yes
|
Yes
|
No
|
|
1.2 receiver
|
Yes
|
Yes
|
Yes
|
Yes
|
Yes
|
Yes
|
|
2.0 receiver
|
Yes
|
No
|
No
|
Yes
|
No
|
No
|
|
2.1 receiver
|
Yes
|
Yes
|
No
|
Yes
|
Yes
|
No
|
|
2.2 receiver
|
Yes
|
Yes
|
Yes
|
Yes
|
Yes
|
Yes
|
|
|
|
|
|
First Strike FS-1
 |
Trimax SM-2200
 |
|
|