Maxpeak SAM is a battery powered hand held satellite alignment meter. It powers the LNB and is programmed from the web via built in USB. Find High Sensitivity * 75dBm c * Ku * Ka * L band

Unique touch wheel to acess all functions. All difficult tasks like programming and difficult menu or operation is eliminated. Extremely fast and accurate with high sensetivity. Developed for DTH & the VSAT market. Low symbol rate e.g.2000

To align the integrated SWM LNBs (SL5S or SL3S) with a Maxpeak Meter, you must
use a single port power passing splitter, rated at least 2mHz to 2150mHz, Connect the SWM power inserter to the power passing port of the splitter, connect the Birdog to the non-power passing port.

Includes: * Carrying Case * Home Charger * USB Lead * Car Charger * Replaceble F Connector

Specification:

* High sensitivity -75dBm
* C, Ku, Ka or L band
* Up to 70 trnsponders/Sats
* Replacable F-connector
* Innovative touch wheel (like Ipod) to quiclky get to all satellites.
* Peak hold on all barograph e.g. shows the maximum achieved
* 75 Ohm imp 30 to 100 dBuV
* RF level as dBm or dBuV.
* True MER or SNR displayed in dB
* Pre and Post BER in numerical value
* Quality displayed in % (reverse BER)
* RF, BER,MER displayed together
* Backlite graphics display 128x64 dots
* 32 bit processor
* Integrated rechargable NiMH battery
* Charged from wall adaptor or car
* Calss IVmeets mandatory California Energy Commissions requirements 2998
* Meter operates while charging
* Upto 80 sats dividable in sub groups
* Upgrade of settings via USB 2.0
* Upgrade of firmware via USB 2.0
* Language option via USB 2.0
* Built in audible sounder
* DiSEqC switch commands and 22 K tone
* Designed for Ka/Ku band DIRECTV lnb & Dishnetwork Dishpro+
* Run time in excess of 4 hours
* Back light
* 200x75x56 mm 800 grams
* Complete support via interactive website

Maxpeak SAM Manual
Click Here