| | |
|
| |
| | |
|
|
|
SWM-16 Multiswitch With Power Inserter & (2) 8-Way SWM Spliters
|
SWM-16 W/P&SW
|
Detailed Description
Commercial Grade
SWM-16 Single Wire Multi-Switch (16 Channel SWM)
This is the SWM16 Multisiwtch from DIRECTV For use with a 5 LNB DIRECTV "Slimline"Dish.
This Kit INCLUDES:
This is the SWM-16 diagram for Directv SWM Multiswitch 16 Tuners. As you can see this kit includes all necessary components for you to have the ability to have 16 tuners form one single Satellite dish from Directv "Slimline Antenna" This kit also allows you to have only one wire going to each receivers DVR's or non DVR's.
Installation Refernce Guide
FEATURES:
-
The SWM16 features a Die-cast housing is suitable for both indoor and outdoor use
-
Supports six (6) LNB inputs, each triple-band stacked four ports (Ports 1 - 4) cover existing 99°/101°, 103°/110°/119° satellites, plus two Flex Ports (95º sat and 72.5º sat)
-
29 Volt Power Supply Included
-
DECA "bridge" Technology for IP callbacks and Multi-Room Viewing (MRV)
-
When used with DECA adapters, will provide network access to all compatible receivers, unlike having two SWM8s, which will only pass network to half the receivers
-
Provides sixteen independent channels for supporting up to 16 DIRECTV satellite tuners
-
Provides two outputs to serve two customer dwellings (typical)
-
Contains a built-in di-plexer for combining off-air signals with DIRECTV satellite signals onto a single home-run wire to the dwelling
-
Provides AGC for the satellite input signal
Basic requirements for the SWM16:
In order to successfully install the SWM 8 Multiswitch you will need:
- A Slimeline Satellite Dish (AT9 or Au9) from Directv with 4 output lnb, the (SL5) 5LNB or the (SL3) 3LNB
- A SWM Compatible Receiver
The Compatible Receivers for the SWM-16 are:
SD Receiver
SD DVRs Receivers
HD Receivers
HD DVRs Receivers
** For more information please contact Satpro.tv (305) 259-4255
|
|
|