content on this page requires a newer version of adobe flash player.

Get Adobe Flash player

Search
Browse by Manufacturer


DIRECTV SWM-8 MultiSwitch Only
SWM-8 Single Wire Multiswitch Only for DIRECTV
SWM-8 MultiSwitch Only
: $98.00

Detailed Description

Commercial Grade
 
SWM-8 Single Wire Multi-Switch (8 Channel SWM)
 
This is the SWM-8 Multisiwtch from DIRECTV, it allow you to distributed the DIRECTV signal via one cable. For use with a 5LNB DIRECTV Dish "Slimline" With this switch you can run one line from your dish to your DVR. This SWM8 eight channel single wire multiswitch also allows any transponder form any satellite input to be independently selected and distributed via one of eight designated SWM output frequency channels.
 
**This SWM-8 Multiswitch does NOT come with the Power Inserter.
 
 
swm8 switch
 
The SWM-8 (single-wire multiswitch, also knows as the SWM8 or SWiM) was designed to eliminate many of the issues involved in using house wiring in DIRECTV installs. Where previously several lines were required to run from a dish or multiswitch through outside walls and into individual rooms, the SWM-8 allows the signal to be run much more like a standard cable TV installation - only one line needs to run from the outdoor dish to the inside of the house.
 
Problem Solution
You have only one line run into a room that you want to have a DVR and can’t or don’t want to add additional wiring. The SWM8 solves the problem!
You have only one line run into a room and you want to have multiple DIRECTV receivers in that room, or one or more DVRs. The SWM8 solves the problem!
You have only one line run from your roof down to where all of the wires in your house meet. The SWM8 solves the problem!
You have an off-air antenna and a 5LNB HD DIRECTV dish and want to combine the signals on one line. The SWM8 solves the problem!
You have a cable and DIRECTV signal that you want to combine onto one line. The SWM8 solves the problem!

DIRECTV SWM-8 Multiswitch

 

Basic requirements for the SWM8:

In order to successfully install the SWM 8 Multiswitch you will need:

 

  • A Slimeline Satellite Dish (AT9 or Au9) from Directv with 4 output lnb, the (SL5) 5LNB or the (SL3) 3LNB
  • A SWM Compatible Receiver

 

The Compatible Receivers for the SWM-8 are:

SD Receiver

 

  • D12
  • D13

 

SD DVRs Receivers

 

  • R16
  • R22
  • R23

 

HD Receivers

 

  • H20
  • H21
  • H22
  • H23
  • H24

 

HD DVRs Receivers

 

  • HR20
  • HR21
  • HR22
  • HR23

 

 

 

DIRECTV multiswitch
 
** For more information please contact Satpro.tv (305) 259-4255


Shopping Cart
Your cart is empty.