SWM-32 KIT With Power and 4 Splitters Complete Kit

SWM-32 KIT With Power and 4 Splitters Complete Kit
Item Number: SWM32R0-Pwr 4-Split
Manufacturer: DIRECTV
Manufacturer Part No: SWM32R0
Price: $1,000.00


satellite swm32r0-09
Commercial grade 32 Port multiswitch for DirecTV satellite systems.
  • SWM32R1-09 Multiswitch
    swm32r0-09 multiswitch by directv
  • (2) Power Inserters SWM-32 (24 VCD)
    satellite switch
  • (4) 8 Way Wide Band Splitters for SWM 
    swm-32 multiswitch swm32 switch
This kit includes all necessary components for you to connect 32 tuners.

Installation Diagram:
swm32 diagram
  • The SWM32R1-09 features a Die-cast housing suitable for both indoor and outdoor use.(Indoor Recommended)
  • Supports six (6) LNB inputs, each triple-band stacked four ports (Ports 1 - 4) cover existing 99-deg;/101-deg;, 103-deg;/110-deg;/119-deg; satellites, plus two Flex Ports (95-ordm; sat and 72.5-ordm; sat)
  • 24 and 20 Volt Power Supplys Included
  • DECA "bridge" Technology.
  • Provides 32 independent channels for supporting up to-nbsp;32 DIRECTV satellite tuners.
  • Provides four SWM outputs.
  • Contains a built-in di-plexer for combining off-air signals with DIRECTV satellite signals onto a single home-run wire to the dwelling
  • MRV multi room viewing is limited to each 8 way splitter.


Requirements for using a SWM32R1-09?
There are two basic requirements:

(1) A compatible dish (Slimline Dish with SL5/SL3 four output LNB) Single wire SWM lnb can not be used.

(2) DirecTV SWM-compatible receivers.

SWM-compatible receivers:





HR20-100 through HR20-700
HR21-100 through HR21-700
HR21 Pro (all models)
HR22-100 through HR22-700
HR23-100 through HR23-700
H20-100 through H20-700
H21-100 through H21-700
H22-100 through H22-700
H23-100 through H23-700
R16-100 through R16-700
R22-100 through R22-700
R23-100 through R23-700
D12-100 through D12-700
D13-100 through D13-100

What are the Flex Ports for?

The SWM has two ports labeled Flex Port 1 and Flex Port 2. These are used in DIRECTV installations that have more than one dish (such as an international dish or, in certain markets, where a separate dish is required for local channels).

What is the OFF-AIR port for?

The SWM has an input for an off-air antenna. The SWM can carry both DIRECTV satellite signal and off-air antenna signal. If you wish to use an off-air antenna, you will connect the off-air antenna directly into the SWM, and then all outputs from the SWM will carry the DIRECTV and off-air signal. You must then use a special splitter, called a diplexer, to separate the two frequencies before connecting the output to a receiver. Please be careful with your selection of diplexers, not all work properly with a SWM.